Quick Detail:
| Name | Other name | Brand Name | CMC |
| Cut to length line for light pole | Decoiler, Steel coil cutting machine, Slitting, Cutting machine for lightpole; | Feature | Our line is different with the traditional cut to length, you can
get ladder-shaped sheet with one side small and one side bigger
width |
| Cutting capacity | 2-6mm in thickness 12000mm in length 800-1600mm in width | Usage Industrial | Street light pole industrial |
Description:
Technical Parameter
1. Thickness of material: 2mm-6.0mm for Q235A hot rolled mild steel
2. Width of material: 800-1600mm
3. Weight of steel coil: Max 15 tons
4. Inner diameter of steel coil:Φ500mm-Φ750mm
5. Leveling speed: 5- 15m/min
6. Number of leveling rollers: 13
7. Leveling rollers diameter : 130mm
8. Length range for scale: 2000～12000mm according requirments.
10. Tolerance of cutting length :±15mm (base on 8m length plate)
11. Main leveling motor power: 37kw (total about 57KW)
12. width area for machine:about 7000mm
Application:
It is for light pole material uncoiling, leveling, cutting, scrape
edge slitting and taper slitting process,
to get one side small width + one side big width steel plate.
Specifications
1. Steel coil loading dolly car:
UP and down: Hydraulic
Horizontal moving: motorized
Max.loading weight: 15Tons
2. Hydraulic double-head umbrella type decoiler:
Including:Motorized pay off, Motor, reducer,
The chain system takes the shift to rotate. The rotation direction
can be clockwise and unclockwise.
Open and close: Hydraulic
Max.loading weight: 15Tons
3. Leveling unit: (two lay type),
Two layer rollers leveler,
13 rollers,including 2 feeding rollers,11 leveling rollers
Leveling roller material:42Cr. dia:130mm,IF quenched
Two layers Leveling rollers, motor drive worm screw to adjust up
layer move up and down
Transmission system includes speed adjustable motor, reducer and so
on.
Feeding rollers up/down movement is with hydraulic.
Unit is with guiding systeml
length measuring
Length counting encoder is installed on the roller
4. Cutting (Manual plasma cutter prepared by customer)
5. Double edge slitting unit.
It is for slitting scrape edge of the hot rolled steel plate to get
the exact width for light pole.
It is base on the rolling shearing principle to cut the steel
sheet. There is a dolly in the front of the slitting unit.
It is for control the straight cutting. By change the position of
the slitting blade to get different width fr different size light
pole sheet.
Including :
Supporting table with the rail
Clamping sheet dolly, one piece
Double blades type edge slitting unit with motor and gear box.
6. Taper slitting unit
The taper slitting machine is based on the rolling shearing
principle to cut the steel sheet. There is a dolly in the front of
the slitting unit.
It is for control the taper cutting degree. By change the position
of the stopper on dolly to control the taper slitting rate.
Including :
Supporting table with the rail
Clamping sheet dolly, one piece
Single blades type edge slitting unit with motor and gear box.
7. Ball type support table for finished taper sheet
8. Electrical system:
Central control table. PLC, AC driver inverter have the feature of
quick response and good activity, which can effectively control the
measuring accuracy and running speed.
9. Hydraulic system:
Hydraulic power 25L/min
Including:hydraulic station, valves, oil tank, joint, soft pipe,
hard pipe and so on.
What is the difference with our standard cut to length and
economical one?
Compared with standard cut to length, the economical type does not
have:
1) hydraulic guiding-pressing, shovel-head, pinch and feeding
device
The user must use crane to lift and guild the sheet head to the
leveling unit
2) hydraulic swing beam shearing machine: QC12Y-6X2000
The user must use manual plasma cutter machine to cut the sheet.
Communication with customers
Customer: How to cut sheet with one side small width and one side
big width sheet by this machine?
Supplier: First, there is a double edge slitting unit, it is for
slitting scrape edge of the hot rolled steel plate to get the exact
width for light pole,
and then we can use our taper slitting unit to cut the steel sheet
into 2 pieces with one side small and one side bigger sheet.
There is a dolly in the front of the slitting unit. It is for
control the taper cutting degree. By change the position of the
stopper on dolly
to control the taper slitting rate.
Customer: How many models do you have for cut to length?
Supplier: We have three kinds, Model No. 6X1600 - 12 meters (for
the maximum cutting length 12 meters), Model No. 6X1600 - 14 meters
(the maximum cutting length 14 meters) and Model No. 6X1600 - 16
meters (for the maximum cutting length 16 meters).
Customer: How long is your quality guarantee period?
Supplier: Our machine quality guarantee is 1 year. Once the machine
arrives customer workshop, we will send engineers for machine
installation, commissioning and training. You can also send
engineers to our workshop for operation study before machine
delivery.
